Prefinished Hardwood Flooring

Prefinished hardwoodflooring arehardwood floors that have been finished in the factory.Then you simply install it directly into your home. There are also unfinished hardwood floors which is raw hardwood that needs to be nailed into the floor and then sanded and treated on-site.

Durable

Prefinished hardwood is extremely durable. When the floors are finished in the factory they apply a very powerful chemical sealer. On-site installers cannot use this commercial process when treating their hardwood floors. The chemical sealers contain multiple layers of an aluminum-oxide-infused polyurethane and is cured under UV lights. Prefinished floors could have warranties ofup to 25 years, as opposed to warranties of 3 to 5 years for unfinished hardwood flooring.

Easy installation

Since there is no wait-time for any coating to dry, you can walk on your floors the same day they’re installed. Installing unfinished wood flooring is a multi-day process. It requires sanding, staining and then gets covered with three polyurethane top coats. Prefinished flooring can be put down in a single day. With unfinished flooring it can take weeks before you move your furniture in.

Most prefinished floors come with beveled edges. This hides unevenness and protects the finish from chipping while installing. You can also opt for bevel-less “square-edged” flooring. This looks more like unfinished flooring but is recommended for flat surfaces only since an uneven subfloor could expose edges.

Reversable

Due to the chemical sealer, prefinished hardwood floors are more stain-resistant than unfinished hardwood floors. It has a very natural look. However, if you decide later that you do want unfinished hardwood floors instead, you can change it. Sand the floors to remove the chemical sealer applied by the factory and use basic on-site finishing techniques to treat the unfinished wood floors. Note that this limits the amount of times that you can refinish your floors. Since you have to sand down further to remove the coating and reach the unfinished hardwood again, this will cut into the thickness of the floor.

Maintenance and cleaning

Sweep your prefinished hardwood floors regularly to avoid grime and dirt. This can chafe the coating layer. If you choose to vacuum, do so with a soft brush attachment. Avoid soaps with oil, as this breaks down the finish and attracts grit onto your floors. Instead, mop with a microfiber cloth with a high-quality cleaner specified by the manufacturer. You can also remove scratches with a manufacturer’s touch-up kit.

Unfinished Hardwood Flooring

When you choose wood flooring, you have the option to get pre-finished or unfinished hardwood. Unfinished hardwood flooring is installed into your home as bare wood stock.It is then finished on-site by sanding and a finishing treatment. Although it takes a little longer to install unfinished hardwood flooring, there are several benefits to it. The first one being that it so versatile. You can adapt the look to create the atmosphere you want in your home.

Why choose unfinished hardwood floors?

There are a few advantages to having your wood floors finished on site. As mentioned, it provides you with the option to customize.You can buy anything from narrow plank strips to broad planks. The wood is bare when it is nailed to the ground and sanded down, this is to create a smooth surface. If the sides where the boards meet each other are nice and tight, you can sand it for a virtually uninterrupted surface. Due to this the floor is stable and even. It also helps to keep the wood’s natural characteristics.
Because unfinished hardwood flooring is finished on-site, it has better uniformity of seal and finish. Due to minutely uneven flooring planking, empty spaces and cracks sometimes form. When they do the treatment on-site, they allow the finish and seal to fill these cracks, making for a more even floor.
As opposed to unfinished wood floors, prefinished wood floors come standard with micro-beveled edges, which some people find unattractive. It is also more difficult to clean since they trap more dirt than the smooth floors sanded on-site.

The natural look

If you’re aiming for the natural look, choose unfinished hardwood. Your variety of choice goes down significantly with prefinished wood, where the veneer can sometimes make the floor look a bit unnatural. However, not all veneer on prefinished hardwood has this plastic look. Look for higher quality if you are considering pre-finished hardwood.

The luxury of choice
You have a myriad of color choices with unfinished hardwood flooring. If there is a specific shade you want, you can use a stain color computer. It will match whatever shade you want in your house. You don’t have this option with prefinished hardwood flooring.
There is also a variety of species and configurations you can choose from when using unfinished hardwood. You can buy reclaimed wood to keep the rustic look. This flooring stock is made from quality timbers salvaged fromold buildings or sunken logs.

Match your existing wood flooring exactly
If you decide to build on to your existing wood flooring, prefinished wood might not be an exact match. It’s easier to do with unfinished wood stock. The wood can be joined to you existing floor with an exact color match and a natural look.

Ceramic and Porcelain Tiles

Despite the similar look, there is a distinct difference between ceramic and porcelain tile. Porcelain is a type of ceramic, but not all ceramics are porcelain. Porcelain is just one of the varieties of ceramic tile and is made from a more refined material.

How is it made?

Ceramic tile is made up of sand, natural products and clays. Once it has been molded into shape, it is fired in a kiln. You can have either glazed or unglazed tiles. Because ceramic tile is porous, they usually seal the top surface with a glaze. This surface is called the design layer and determines the ultimate color, design and texture. Because of its composition, glazed tiles don’t absorb odors, allergens or bacteria. It is therefore the easiest tile surface to clean.

Porcelain tile is made from more refined and purified clay than ceramic tiles. It is also fired in a kiln at a higher temperature and higher pressure than ceramic tile. The result is a very dense, less porous and firm material. The water absorption rate is less than 0.5%.Ceramic tiles are more suitable for light to medium traffic areas. It has a water absorption rating of about 4%.

Where should I use tiles?
Tiles are a great choice for bathrooms, kitchens, porches and laundry rooms. All places that are prone to moisture and moisture damage to your floor. You can use ceramic tiles for both walls and floors. The tiles are durable, water resistant and stain resistant. You are also spoiled for choice when it comes to colors, patterns, shapes and sizes.

Strength ratings

Although all tiles are hard, as we see above, some are harder than others. The bisque or biscuit of the tile is produced to meet a specific need and criteria. Check the rating of your tile before you decide where to use it or which strength you require.

  • Group 1: Suitable for light trafficsuch as guest bathroom floors.
  • Group 2: Designed for floors where little abrasion occurs with medium traffic. It is not recommended for your entryway or stairs.
  • Group 3: Suited for medium to heavy traffic anywhere inside your house.
  • Group 4: For heavy traffic anywhere in you home and suitable for medium traffic in retail spaces.
  • Group 5: Extra heavy traffic for use anywhere.
contents coming soon
contents coming soon
What is SPC flooring?

SPC (Stone Polymer Composite) flooring introduced a new generation of floor covering. It is extremely stable, completely waterproof and resistant to dents and scrapes. Itwas introduced in 2016 and made an even bigger impact on the industry in 2017. This year SPC flooring is expected to become even more popular due to its quality.

What is SPC flooring made of?
SPC flooring is part of a resilient family of flooring, like LVT (Luxury Vinyl Tiling) and WPC (Wood Polymer Composite) flooring. Some industry experts say it is a technological improvement on WPC flooring. It is often used for its extremely effective water resistance and rigidity.
The contents of SPC flooring are natural limestone powder, polyvinyl chloride and stabilizer. At the perfect ratio this produces a very stable composite material. It contains no wood. Instead, stone with a silica core is used. Because it is made with completely waterproof materials, it is immune to expansion and contraction, even in areas with moisture.It is safe for use in your home and in public buildings, since it contains no formaldehyde.

Advantages of SPC flooring

Due to its rigidity, it handles weight better than other types of flooring. If you have a heavy pool table or something similar, consider using SPC flooring to prevent dents in your floors. SPC flooring is 20 times as impact resistant as laminate and 10 times more resistant than WPC flooring. SPC flooringis also fire-resistant.

As with LVT and WPC flooring, you can have any type of texture on your SPC flooring surface. There are also mold design companies who develop new textures continuously. Some of the most popular ones are:

  • Deep embossed surface
  • Crystal embossed surface
  • Marble embossed surface
  • Hand-scraped surface
  • Embossed in Register (EIR) surface

There is also a new SPC flooring texture that has a real wood veneer. This gives you the rich look of wood without the disadvantages of wood floors. SPC and wood veneer flooring proved to be 100% waterproof and stay dimensionally stable, even in wet areas.

Installation simplified

It is easy to install and goes on several different types of floor bases. It can be ceramic, concrete or an existing floor. Most of the SPC flooring on the market has padding attached to it already. You do not need a floor cutter when you work with SPC. It can be scored with a razor and snapped instead of cut. This means that your installation costs are much cheaper.

Get Free In Home Estimate